The best accessories for Nikon Zf solve a very specific problem: this beautiful retro-styled full-frame camera has modern autofocus, in-body stabilization, dual card slots, and a 24MP sensor, but its shallow front grip will not suit every hand or lens. Start with handling, then add power and protection that match how and where you shoot.
I would not buy every add-on at once. Forum conversations repeatedly point to slippery one-handed carry, a need for more purchase with larger lenses, and a hot shoe that is easy to scuff; those are useful clues for putting a short, sensible kit together.
These 12 Nikon Zf accessories cover grip comfort, compact shooting, legacy F-mount lenses, EN-EL15c charging, card storage, display protection, viewfinder comfort, and cleaning. I based each recommendation on the listed compatibility, specifications, review feedback, and stated limits, rather than pretending one accessory fits every photographer.
The top 3 picks for Nikon Zf owners are handling-first choices (August 2026)
If I were starting from zero, I would choose the Nikon grip for the most integrated hold, the SMALLRIG case kit for a protected vintage look with a strap, or the Haoge rest when I wanted the smallest handling change. The right one depends on whether your hand needs a deeper front grip, rear-thumb support, or both.
Nikon Z f-GR1 Extension Grip
- Front and rear grip
- Matching artificial leather
- Secure full-wrap hold
SMALLRIG Vintage PU Leather…
- Front grip and thumb rest
- Microsuede lining
- Shoulder strap included
The best accessories for Nikon Zf in 2026 cover comfort, care, and capability
This overview makes it easy to locate the accessory that answers your immediate need. It also shows where these picks are complementary rather than interchangeable: a charger does not add batteries, and a thumb rest does not replace a full front grip.
| Product | Specs | Action |
|---|---|---|
| Nikon Z f-GR1 Extension Grip |
|
View on Amazon |
| SMALLRIG Zf Leather Case Kit |
|
View on Amazon |
| Haoge Zf Thumb Up Rest |
|
View on Amazon |
 VILTROX 28mm f4.5 Pancake |
|
View on Amazon |
 VILTROX NF-Z Mount Adapter |
|
View on Amazon |
 K&F EN-EL15C Battery Set |
|
View on Amazon |
 SMALLRIG EN-EL15c Charger |
|
View on Amazon |
 JJC Battery and Card Case |
|
View on Amazon |
 HUIPUXIANG Zf Screen Protector |
|
View on Amazon |
 KIWIFOTOS DK-33 Eyecup |
|
View on Amazon |
 JJC Hot Shoe Cover |
|
View on Amazon |
 VSGO Full-Frame Cleaning Kit |
|
View on Amazon |
1. Nikon Z f-GR1 Extension Grip is the closest match to the camera’s original feel
Nikon Z f-GR1 Extension Grip for Nikon Z f
5.44 oz
Front and rear grip
Matching artificial leather
Pros
- Made specifically for the Zf
- Front and rear hand support
- Matches camera finish
- Secure wraparound hold
Cons
- Not water resistant
- No stated quick-release base
The Z f-GR1 is the logical first stop if the Zf body feels too shallow in your hand. Nikon designed it as an extension grip with a front section for the fingers and a rear section that accepts the thumb in a natural position.
That two-point approach matters more than a cosmetic add-on when I think about a day with a heavier Z-mount lens. Its artificial-leather surface is stated to match the body, so it keeps the Zf’s visual character rather than turning it into a different-looking camera.
It is the right grip when you want an integrated front-and-rear hold
Choose this grip if your main concern is wrapping your hand securely around the camera while keeping the Nikon Zf design intact. The published details describe a full grip area rather than a small lip or a hot-shoe thumb catch.
It needs a separate mounting plan for tripod-focused shooting
The listed specifications do not state Arca-Swiss compatibility or a quick-release base. Photographers who move between handheld work and a tripod should confirm their plate or head arrangement before making this their sole mounting solution.
2. SMALLRIG Vintage PU Leather Case Kit adds grip, coverage, and a carrying strap
SMALLRIG Camera Case Kit for Nikon Z f, Vintage PU Leather Camera Case Kit, with Enhanced Grip, Scratch-resistant Microfiber Lining, Aluminum Alloy Frame,Shoulder Strap, Brown – 5096
PU leather
Front grip plus thumb rest
Microsuede lining
Pros
- Dual grip system
- Quick thumb-screw fitting
- Access to ports and cards
- Shoulder strap included
Cons
- PU leather is not natural leather
- No stated weather resistance
This SMALLRIG Nikon Zf case kit combines a front handgrip, rear thumb rest, soft interior lining, aluminum-alloy frame, and adjustable cross-body shoulder strap. It is a broad answer for owners who want a single accessory to change both security in the hand and daily carrying.
The case uses vintage croco-embossed PU leather with red stitching, making it a natural visual match for the Zf’s retro design. Its thumb screw is listed as a quick-install 1/4-20 design, and the maker says ports, battery access, SD card access, and focus-mode access remain available.
It suits photographers who want one kit for walking and shooting
The included strap gives this case an advantage over a grip alone when one-handed carry is the real pain point. I would favor it for travel photography or a casual photo walk where the camera needs to move from shoulder to hand often.
It asks you to accept a full-case approach rather than a bare-body feel
Use this only if you like having a case on the Zf most of the time. The product data supports full access to key controls, but its 122.5-gram case format adds more material around the body than a dedicated extension grip or thumb rest.
3. Haoge Metal Thumb Up Rest improves rear-thumb support without a baseplate
Haoge Metal Thumb Up Rest Hand Grip for Nikon Zf ZF Camera Accessories Black THB-ZF-B Hot Shoe Thumb Up
Hot-shoe mount
Aircraft-grade aluminum
Rear-thumb support
Pros
- Small handling change
- Precision-machined aluminum
- Supports one-handed operation
- Available in black and silver
Cons
- Occupies the hot shoe
- Not water resistant
The Haoge Metal Thumb Up Rest slides into the Zf hot shoe and gives the right thumb a more defined place to sit. Its CNC-machined aircraft-grade aluminum construction is stated to dampen vibrations and create a more stable contact point.
Community discussion often separates a thumb rest from a true grip extension, and that is the helpful way to assess this accessory. A rest improves rear leverage for one-handed operation; it does not create a deeper front finger grip.
It works best when your Zf needs a compact one-handed control point
I would choose the Haoge for a compact lens setup when the camera otherwise feels close to right. The black and silver options give owners a stated color choice, and the small form does not add a case around the body.
It is not the answer when you need flash or other hot-shoe gear
Because the rest attaches through the hot shoe, it can interfere with other accessories that use that location. This is also the wrong direction if your fingers, rather than your thumb, need substantially more room around a larger lens.
4. VILTROX 28mm f4.5 Pancake Lens keeps the Nikon Zf kit compact
VILTROX 28mm f4.5 Pancake Lens Z, AF 28mm f4.5 Z Mount Lens for Nikon, Full Frame Z Mount for Nikon Z7ii Z8 Z5 Zfc Z6ii Z6iii Z50 Zf
28mm prime
Fixed f4.5
16.8mm thick
Pros
- Very compact pancake format
- Integrated sliding cap
- Autofocus
- USB firmware updates
Cons
- Fixed f4.5 aperture
- Not water resistant
A lens is not a conventional camera accessory, but this VILTROX 28mm f4.5 makes sense in a Nikon Zf kit because it keeps the camera’s compact, walk-around character. The technical listing calls it 65.3mm in diameter, 16.8mm thick, and 80g, with an integrated sliding lens cap.
Its fixed 28mm focal length and fixed f4.5 aperture make the decision unusually simple. You get autofocus and USB firmware upgrade capability, but not the flexibility of changing aperture for low-light work or depth-of-field control.
It fits street and travel photographers who value the smallest Zf profile
The 28mm view is a wide-angle field of view, and the thin pancake format is the selling point. I would put it on a Zf when compact carry and a ready-to-shoot setup matter more than a broad aperture range.
It is a poor match when adjustable exposure control is the priority
The f4.5 aperture is fixed, not adjustable, and the listing says the lens is not water resistant. Select a different lens type if you frequently shoot in dim conditions, want aperture changes, or expect rain without other protection.
5. VILTROX NF-Z Mount Adapter brings compatible Nikon F lenses to the Z mount
VILTROX NF-Z Mount Adapter FTZ Auto Focus Lens Converter Ring Adapter for Nikon F Lens to Z Camera Z5 Z50 Z30 Z6 Z6II Z7 Z7II Zfc Z8 Z6III Z7III
Nikon F to Z mount
Autofocus support
EXIF transfer
Pros
- Uses Nikon F lenses on Z bodies
- Electronic aperture control
- EXIF transmission
- USB firmware updates
Cons
- Results can vary by lens
- Adds 0.25kg
The VILTROX NF-Z is the relevant option here for a photographer with a shelf of Nikon F-mount glass. It connects Nikon F lenses to Z-mount cameras and is listed with electronic contacts for autofocus, camera-body aperture control, lens anti-shake support, and EXIF information transmission.
This is a meaningful way to expand the Nikon Zf system without assuming every older lens will behave exactly like a native Z-mount lens. The review notes report that focusing speed can vary with certain lens combinations, which is the main pre-purchase check.
It makes sense when legacy F-mount lenses still have a role in your work
Use this adapter when retaining compatible F lenses is part of your move to the Zf. USB firmware upgrades are listed, which gives the adapter a stated route for later compatibility updates.
It needs lens-by-lens checking when fast autofocus is non-negotiable
The adapter is described as supporting fast autofocus, yet reviewer feedback flags variation with some combinations. I would verify the exact F lens, firmware status, and the autofocus behavior you need before relying on it for demanding subjects.
6. K&F CONCEPT EN-EL15C Battery Set adds two batteries and a charger
K&F CONCEPT 2100mAh EN-EL15 EN-EL15C Battery and Dual Slot Charger for Nikon ZR Z8 Battery Compatible with Nikon Z8 Zf Z7 Z7ii Z6 Z6ii D7500 D750 D850 D780 1V1 Camera
Two 2100mAh batteries
Dual-slot charger
USB-C and Micro B
Pros
- Two batteries included
- LED charging indicators
- Two input types
- Multiple safety protections
Cons
- Third-party battery set
- No individual runtime claim
This K&F CONCEPT set is the more complete power option because it includes two EN-EL15 or EN-EL15C batteries rated at 2100mAh, 7.4V, and 15.5Wh along with a dual-slot charger. It is listed as compatible with the Zf and a long group of Nikon Z and D-series cameras.
The charger accepts USB-C and Micro B input and uses LED indicators. That matters when I plan a video day or travel day: the kit creates spare-battery capacity rather than only changing the way existing batteries are charged.
It is the better choice when spare batteries matter as much as charging
Choose this set for a simple power backup workflow with two batteries ready to rotate. The product also lists protection against overcharging, high temperatures, over-current, over-voltage, and short circuits.
It needs realistic runtime testing in your own shooting mode
No individual Zf runtime figure is provided in the product data, so it would be misleading to promise a certain number of frames or video minutes. Charge, label, and test the pair with your own mix of stills, screen use, and video recording.
7. SMALLRIG EN-EL15c Charger is the fast USB-C choice for batteries you own
SMALLRIG EN-EL15c Battery Charger for Nikon, 2H Dual Slot 22.5W Charge
Two slots
22.5W USB-C
Two-hour stated charge
Pros
- Charges two batteries
- Five LEDs per slot
- USB-C input
- Safety protections
Cons
- Batteries not included
- Needs 22.5W adapter for fast charging
The SMALLRIG charger is for Nikon Zf owners who already have EN-EL15c batteries and want a portable two-slot charging station. It has a 22.5W USB-C port, five power indicators per slot, and a stated two-hour rapid charge time for two batteries.
Its semi-enclosed design is intended to keep batteries from slipping, while the technical details list over-temperature and over-voltage protections. This is a charger rather than a battery bundle, so it should be paired with batteries already in your kit.
It is a strong match when USB-C charging speed is the goal
I would choose this model for a Zf setup that already has multiple compatible batteries and a sufficiently powerful USB-C source. The five LEDs per slot are useful for checking charge status without putting the battery in the camera.
It requires a capable power adapter for the stated fast-charge result
The review data says it is not compatible with 5V/1A adapters and needs an adapter rated at 22.5W or higher for fast charging. Verify your wall plug or power source instead of assuming every USB outlet will produce the same result.
8. JJC Battery and Memory Card Case keeps power and cards together
JJC Portable Camera Battery Memory Card Storage Case for 3 SD Card,4 CFexpress Type-B/XQD Cards,2 Camera Batteries,Compact Cameras Battery Holder Box for Nikon EN-EL15
IP67 case
Two batteries
Three SD card slots
Pros
- Waterproof and dustproof
- Stores batteries and cards
- Impact-absorbing padding
- Compact layout
Cons
- Does not list MicroSD storage
- Large batteries may not fit
The JJC storage case is an organizational accessory rather than a card or battery itself. Its stated layout holds two camera batteries, three SD cards, and four CFexpress Type-B or XQD cards, with IP67 waterproof protection and a TPR-padded base for impact absorption.
For a Nikon Zf, this helps create a more deliberate card-and-power routine even though the body uses a UHS-II SD slot and a MicroSD backup slot. The listed compartments do not mention MicroSD, so do not assume that smaller format will be held securely without checking the actual card arrangement.
It is useful when loose cards and batteries are the failure point in your bag
I would choose it for a clearly separated clean-and-charged storage system. The hard case, locking system, and included lanyard support a kit that is easier to account for before and after a shoot.
It needs a size check for batteries and a plan for MicroSD media
The stated maximum battery size is 2.32 by 1.56 by 0.91 inches. Its named card formats are SD, CFexpress Type-B, and XQD, so photographers who use the Zf’s MicroSD backup slot should carry that smaller card in a separately verified holder.
9. HUIPUXIANG Zf Screen Protector protects the rear display with thin glass
HUIPUXIANG ZF Screen Protector for Nikon Z f Camera(for Accessories),(3Pcs)
9H tempered glass
0.3mm thick
99.99% clarity
Pros
- Made for Nikon Zf
- Thin glass
- Hydrophobic coating
- Multiple protectors included
Cons
- Glossy finish
- Fixed 0.3mm thickness
This HUIPUXIANG protector is made for the Nikon Zf LCD and uses 0.3mm tempered glass with a stated 9H hardness rating. The listing also claims 99.99% HD clarity and a hydrophobic, oleophobic coating intended to resist sweat and fingerprints.
The Zf’s rear display is exposed each time the camera travels in a bag or rests against a jacket. A thin protector cannot make the body weatherproof, but it is a simple layer between the display and routine scuffs or smudges.
It is a sensible fit when you want low-profile LCD protection
The cover-edge design is intended to limit bubbles, scratches, and fingerprints, while the high-transparency claim speaks to photographers who do not want a visibly altered preview. The pack contains multiple protectors, which provides replacements if an installation goes wrong.
It may not suit photographers who dislike glossy glass on a touchscreen
The listed finish is glossy, and the thickness is fixed at 0.3mm. If you have a strong preference for a different screen feel or surface treatment, that preference matters more than the hardness number alone.
10. KIWIFOTOS DK-33 Eyecup blocks side light and adds viewfinder comfort
Kiwifotos DK-33 Round Eye Cup Eyecup Eyepiece for Nikon Z8 Z9 Zf Cameras
DK-33 replacement
Soft silicone
Increased eye-cup depth
Pros
- Blocks more stray light
- Soft eye contact
- Works with glasses
- Helps reduce LCD nose smudges
Cons
- Adds depth behind the camera
- No stated weather rating
The KIWIFOTOS eyecup replaces the Nikon DK-33 eyecup on the Zf and is made from soft silicone and durable ABS material. Its extended depth is designed to block more unwanted light outdoors, and the review feedback specifically calls out comfort for glasses wearers.
This is an overlooked accessory for photographers who use the viewfinder for long periods. The deeper cup is also meant to reduce nose smudges on the LCD, which can make a real difference when switching between finder and screen in bright conditions.
It helps most when side light makes viewfinder composition difficult
I would consider this for sunny walks, outdoor portraits, or any setting where reflections and stray light disrupt the electronic viewfinder. The benefit is practical comfort and a more shielded eye position, not a change to the camera’s sensor or autofocus.
It should be checked if you prefer the shallowest possible rear profile
Its increased depth is intentional, but that also places more material behind the viewfinder. The product is easy to slide on and remove, so it is a flexible option if you want to decide after seeing how it fits your face and camera bag.
11. JJC Hot Shoe Cover protects the unused contacts from dust and scuffs
Upgraded Camera Hot Shoe Cover w Full Coverage for Nikon Z5 Z6 Z50 II Z6III
Full-coverage design
ABS material
Slide-in installation
Pros
- Protects shoe contacts
- Slim and light
- Easy to install
- Compatible with Zf
Cons
- May not fully cover all Zf metal edges
- Occupies hot shoe
The JJC cap slides into the Zf hot shoe to protect the metal contacts from scratches, stains, dust, moisture, and oxidation. It is a slim ABS accessory intended for a camera that spends much of its time without a flash, microphone, or thumb rest installed.
Its appeal is modest but clear: photographers in forum conversations mention that the hot shoe cover is easy to scratch. This is the accessory for periods when you want the shoe covered, not for moments when you need the shoe for another device.
It works when the hot shoe is empty and small protective details matter
Use this cap for storage, travel, or day-to-day shooting when no hot-shoe accessory is in use. Its easy slide-in and slide-out installation means it can be treated as a removable protective part rather than a permanent modification.
It needs a fit check because coverage can vary on the Zf
Although the product is listed as compatible with the Nikon Zf, the review feedback says it may not fully cover the metal edges on some Zf bodies. Inspect the fit on your camera rather than relying on the phrase full coverage alone.
12. VSGO Full-Frame Cleaning Kit gives the Zf a sensor-and-lens care option
VSGO DKL-20F Sensor Cleaning Kit for Full Frame Cameras (24mm)
24mm full-frame swabs
Air blower
Dual-tip lens pen
Pros
- Full-frame swabs included
- Lens and sensor tools
- Portable case
- Gentle cleaning products
Cons
- Sensor cleaning requires care
- Only six 24mm swabs
The VSGO kit covers a practical maintenance gap with a mini air blower, dual-tip lens cleaning pen, lens and sensor cleaners, a carrying case, and six 24mm full-frame sensor swabs. Those swabs are the right stated width category for a full-frame sensor such as the Zf’s.
Cleaning is not a casual task, especially at the sensor. I would start with the blower for loose dust and reserve swabs and fluid for a situation where you understand the process and have identified a mark that is actually on the sensor rather than a lens element or screen.
It is the right kit when you need organized full-frame cleaning tools
The value here is not one tool but a complete, portable group of tools in a case. The activated-carbon lens-pen tip and separate sensor supplies let you approach lens surfaces and sensor cleaning as different jobs.
It needs a careful workflow when you are new to sensor cleaning
Only six 24mm swabs are listed, so each one should be treated as a single-use cleaning item. If you have never cleaned a camera sensor, learn the Zf’s recommended procedure or seek experienced service rather than applying force or repeating wet passes blindly.
The right Nikon Zf accessory kit starts with the problem you actually have
Start with the hold. If your fingers need room, the Nikon Z f-GR1 or the SMALLRIG case kit addresses the front of the camera; if the missing contact point is at the rear, the Haoge thumb rest is the lighter intervention.
Do not confuse those roles. A thumb rest uses the hot shoe and may block a flash or microphone, while the case kit includes a shoulder strap and body coverage, and the Nikon grip concentrates on the way your hand wraps around the camera.
The card plan should respect the Zf’s two different card slots
The camera uses a UHS-II SD slot and a MicroSD backup slot. Choose media based on the recording settings you use, and plan storage for both sizes; the JJC case in this list explicitly holds SD, CFexpress Type-B, and XQD cards, but does not state MicroSD storage.
Card organization matters on a long day because it separates empty media from exposed media. I label cards and use a dedicated compartment rather than leaving loose cards at the bottom of a bag, especially when the MicroSD slot is less convenient to access.
The power plan should separate spare capacity from charging convenience
The K&F set adds two stated 2100mAh batteries and a charger, whereas the SMALLRIG unit is for charging compatible batteries you already own. That distinction is the quickest way to pick between them.
For a Nikon Zf video setup, begin with charged spares and test your actual shooting pattern. A USB-C charger can be convenient away from home, but the stated two-hour fast-charge result for the SMALLRIG requires a 22.5W-or-higher adapter.
The protection plan should cover the surfaces you touch and look through
The screen protector handles the rear LCD, the KIWIFOTOS eyecup adds a deeper soft barrier around the viewfinder, and the JJC cap covers an unused hot shoe. None substitutes for sensible weather awareness or a bag that keeps gear dry.
Before going out in wet conditions, use a weather-conscious carrying setup and avoid exposing the camera’s openings when you can. The VSGO kit then gives you a way to remove ordinary dust from lenses and, with care, address sensor contamination.
The adapter choice should begin with the exact Nikon F lens you own
The VILTROX NF-Z is the F-to-Z adapter in this guide, with stated autofocus, aperture control, EXIF transmission, and firmware-upgrade support. Check each lens-and-adapter pairing, because reviewer feedback flags possible focus-speed variation with some combinations.
If a native compact setup is more important than preserving older lenses, the VILTROX 28mm f4.5 has a completely different role. Its fixed aperture and pancake dimensions favor a small, simple camera kit rather than adaptation flexibility.
These Nikon Zf accessory questions have direct answers
Is the Nikon Zf considered a professional camera?
The Nikon Zf is a retro-styled full-frame mirrorless camera with modern autofocus, in-body stabilization, a 24MP sensor, and dual card slots. Those capabilities suit serious stills and video work, while the best accessories for Nikon Zf mainly address handling, power, and workflow preferences.
What is the best camera bag for Nikon Zf?
The best bag is one that holds the Zf securely with the lens you use and keeps cards and batteries organized. This product set does not include a dedicated bag; the SMALLRIG case kit includes an adjustable cross-body strap, while the JJC case organizes two batteries and several full-size cards.
Can I use old Nikon F-mount lenses on the Zf?
A compatible Nikon F-to-Z adapter can mount Nikon F lenses on the Zf. The VILTROX NF-Z listed here supports electronic aperture control, EXIF transmission, and autofocus, but focus behavior can vary by lens combination, so check your specific lens before relying on it.
What is the sharpest lens for Nikon Zf?
There is no single sharpest lens for every Nikon Zf photographer because focal length, aperture, subject, and shooting distance all matter. The VILTROX 28mm f4.5 in this guide is a compact fixed-aperture lens; choose a lens after deciding whether compact carry, low-light ability, or a particular angle of view matters most.
The best Nikon Zf accessories are the ones that remove your next shooting frustration
For most owners, I would begin with the Nikon Z f-GR1 for a more secure integrated hold, or the SMALLRIG kit if a strap, body coverage, and dual grip are part of the goal. Add the Haoge rest when rear-thumb support is enough, then build power and protection around your actual shooting days.
The best accessories for Nikon Zf in 2026 do not need to overwhelm the camera. Check compatibility, protect the display and hot shoe when they are unused, keep cards and batteries organized, and choose the F-to-Z adapter only after confirming the exact legacy lens you want to carry.